1. <video id="mktr7"></video>

      <blockquote id="mktr7"></blockquote><blockquote id="mktr7"></blockquote>

      1. Zhangjiagang Create Material Co., Ltd.



        Chemical and plastic raw materials:
        Tel: +86-512-5899 8900
        Mobile: +86-139 0624 2701
        Tel: +86-512-5836 1933
        Mobile: +86-137 7322 3741
        Tel: +86-512-5899 8920
        Mobile: +86-189 5113 1920

        Film :
        Tel: +86-512-58361988
        Mobile: +86-13915696888

        Product center

        PETG Co-polyester

        Product Type  Plastic and rubber raw materials

        Poly (ethylene terephthalateco-1,4-cylclohexylenedimethylene terephthalate)
        Product Type: Plasic and rubber raw materials

        Product description: PETG resin is a linear homopolymer polyester made by condensing a diol (ethylene glycol, EG) with a diacid (terephthalic acid, TPA).
        Product characteristics.

        Thermoformability PETG sheets are easy to produce products with complex shapes and large stretch ratios without pre-drying prior to thermoforming process. Compared to PC sheet or acrylic, it has a shorter molding cycle, lower temperature and higher yield.
        Toughness Extruded PETG sheets are typically 15 to 20 times tougher than general purpose acrylic and have sufficient tolerance during processing, transportation and use to help prevent breakage.
        Weather Resistance PETG sheet provides excellent weather resistance, which maintains the toughness of the product and prevents yellowing..
        Easy processing PETG sheets can be sawed, die-cut, drilled, punched, sheared, riveted, milled, and cold bent without breaking.

        Application areas.
        Plate sheet Widely used in indoor and outdoor signage, storage shelves, vending machine panels, furniture, construction and machinery baffles, etc.
        Profile It can be formed into pipes or various profiles, its products are hard, transparent, good luster, not white under pressure, easy to form and post-processing treatment, and meet the requirements of environmental protection.
        Cosmetic packaging PETG has glass-like transparency and density close to glass, good gloss, chemical resistance, impact resistance, and easy processing, can be injection molding, injection pulling blow molding and extrusion blow molding.


        Ingredient/composition information:




        Poly (ethylene terephthalateco-1,4-cylclohexylenedimethylene terephthalate)


        Additives / Colorants



        1. <video id="mktr7"></video>

          <blockquote id="mktr7"></blockquote><blockquote id="mktr7"></blockquote>